How to Launch a Kayak?

Written by Best Kayak Guide

Feb 27, 2022

February 27, 2022

Kayaking is a fantastic way to enjoy the outdoors. Not only that, kayaking is a very good form of exercise and health for both your body and mind. Kayaks are much easier to use than one might think as well as being much safer than many forms of water transport such as motorboats which can sometimes pose a serious threat.

In order to launch, you have to get your boat from the upstream side of a river to the downstream side. This is where flat water and moving water come into play. In this article, we have a detailed discussion about this topic.

How to Launch a Kayak?

Simple Answer:

There are a few basic steps to launch a kayak. First, make sure you have enough space and that there are no obstructions in the water. Next, position the kayak so that the bow (front) is facing into the wind. You’ll also want to make sure the kayak is parallel to the shoreline.

Now, grasp the kayak around the cockpit and lift it up until it’s clear of the ground. Gently place it down into the water and use your body weight to push it away from shore. Use a paddle as leverage if you need to give it a little extra push. And that’s all there is to it! Just be careful not to tip over.

Recommended Products:

Recommended Products

01. YAKport Launcher – Steady & Easy Launching

This is a perfect way to easily and safely launch your kayak, canoe, or paddle board! This stable cradle provides a sure footed and stable entry right above water level, making it easy to get started on your paddling session. And when you’re finished, just pull right back onto YAKport and enjoy the same stability and convenience while getting out. With the YAKport Launcher, there’s no excuse not to get out and enjoy the water!

Descriptive Answer:

It’s good to have a clear understanding of how to launch a kayak, and it is certainly helpful. If you’re new to kayaking, it might be a good idea to watch some instructional videos or read up on the subject. There are many different ways to launch a kayak, so it’s important to know the technique that will work best for you and your boat.

Know Your Location

Know Your Location

01. River:

It’s a great experience! Kayaking in a calm river is perfect for beginners because it’s a relatively easy way to get started kayaking. All you need is a kayak, life jacket, and paddle.

Calm rivers usually have gentle currents, so you don’t have to worry about getting too much exercise. This makes it a great way to relax and take in the beautiful scenery. And since the water is usually shallow, you don’t have to worry about running into any obstacles. So if you’re looking for an easy and relaxing way to get started kayaking, then launch your kayak in a calm river.


02. Lake:

When you launch a kayak in a lake, the first thing you’ll want to do is make sure that there’s enough water beneath your boat. You’ll also want to make sure that there’s enough space for your boat to move around without hitting any rocks or other obstacles.

Next, you’ll need to position your kayak at the edge of the water and hold it steady with one hand. With your other hand, grab the back of the kayak and pull it towards you until it begins to move into the water. Then, let go of the kayak and back away from it so that you can start paddling.

03. Sea:

The experience of launching a kayak into the sea can be a very exhilarating and rewarding one. It can provide an opportunity to get up close and personal with marine life and take in some stunning scenic views.

However, it is important to note that launching a kayak into the sea can also be dangerous if not done correctly. Always ensure you have read and understood the safety guidelines before attempting to launch your kayak. And never hesitate to ask for help if you are unsure of how to proceed. However, with proper preparation and caution, launching a kayak into the sea can be an enjoyable experience for all.


Know Your Ground Condition

01. Sandy Shore:

Kayaks can be difficult to launch from a sandy shore, especially deep sand. One way to do it is to dig a small ramp into the sand so that you have something to stand on as you push the kayak into the water. You can also try putting some large rocks or logs in the water near the shoreline and then placing the kayak on top of them. Either way, make sure that you launch your kayak perpendicular to the waves and never head straight into them.

02. Rocky Shore:

Rocky Shore

There are a few different ways to launch a kayak on a rocky shore, but the most popular method is to use a paddle.

If there is a large rock that the kayak can rest against, start by placing the kayak against the rock and securing it in place with your paddle. Next, back away from the kayak until you are standing several feet away. Tilt the kayak towards you and grab onto the bow (front) of the boat with one hand. Use your other hand to push off of the rock and pull yourself into the kayak. Afterwards, gently paddle away in your direction.

03. Dock:

There are a few ways to launch a kayak from a dock. One way is to use a dock cart or dolly. Another way is to use a paddleboard or surfboard as a ramp.

If you are using a dock cart or dolly, place the kayak on the cart and wheel it to the edge of the dock. Then, push the kayak off the dock and into the water. If you are using a paddleboard or surfboard as a ramp, place the paddleboard or surfboard next to the kayak and stand on it. Place your hand on top of the kayak and push it into the water. Then, get on top of the kayak and paddle away.

Know the Type of Water

Know the Type of Water

01. Flat Water:

Answer: When launching a kayak on flat water, you’ll want to make sure that the kayak is pointing in the right direction and that you have enough space to get in. You should also double-check that your paddle is in the correct position before you start paddling.

Once you’re ready, take a few steps towards the kayak and then push off with one foot. Keep your body upright as you step into the kayak and then sit down. Make sure to keep your knees bent and your back straight. Once you’re seated, hold the paddle with both hands and press down on the blade closest to you. Then, pull the paddle towards your chest as you twist it so that the blade that’s farthest from you is now closest. You should then be ready to paddle away from the dock.

02. Moving Water:

There are a few things to remember when launching a kayak on moving water. First, always be aware of the power of the current and how it will affect your kayak. Second, make sure you have enough space to safely launch and land your kayak. Third, use proper technique when launching and landing to avoid tipping or capsizing your kayak.

Fourth, always be prepared for the unexpected. Even if you take all the necessary precautions, things can go wrong. So always have a plan B in case something does happen.

03. Rapid Water:

When launching a kayak on rapid water, it is important to consider the power and direction of the water. It is also important to be aware of obstacles in the water that may pose a danger. Finally, it is necessary to be aware of your own abilities and those of your kayak.

When considering the power and direction of the water, it is important to take into account how fast the water is moving and in which direction it is flowing. This will help you to determine how powerful the current is and how difficult it will be to navigate your kayak through it. It is also important to be aware of obstacles in the water. These can include rocks, logs, or other debris that can damage or capsize your kayak.

Visual Explanations:

I. Launch from Shore:

II. Launch from Dock:

III. Personal Kayak Launcher:

Related Matters:

01. How do I land a kayak at a shore and dock?

When you get close to the shore, you’ll want to angle your kayak towards the shallows. As you approach, slowly reduce speed and then come to a complete stop. Hop out of the kayak and grab it by the cockpit (the top) while keeping your hand on the paddle.

To dock, walk towards the dock until your kayak is even with it. Then, holding onto the dock with one hand, use your other hand to guide the kayak on top of the dock. Once it’s in place, step off of the kayak and into safety.

02. How do you make a homemade kayak launch?

It’s really not that difficult to make a homemade kayak launch. You’ll just need some basic materials like lumber, screws, and a drill. The first step is to measure and cut the lumber to size using a saw. Once the lumber is cut, you can then begin assembling the launch using screws. Be sure to drill pilot holes before inserting the screws so that they don’t split the wood. When you’re finished, your kayak launch should be sturdy and safe for use.

03. How much does a decent personal kayak launcher cost?

A decent personal kayak launcher can cost anywhere from $100 to $300. However, there are a few things you’ll want to consider when purchasing a kayak launcher.

The first is the weight of your kayak. The launcher should be able to support the weight of your kayak, plus about 100 pounds for the person launching the kayak. You’ll also want to make sure that the launcher is adjustable to fit different heights. And finally, you’ll want to make sure that the launcher is made of durable materials that will last through years of use.

How to Launch a Kayak?
How to Launch a Kayak?

Read latest article: How to Get Back in a Kayak?

Related Articles

Related Articles


Stay Up to Date With The Latest News & Updates

Join Our Newsletter

Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque

Follow Us

Sed ut perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque